Research Theses
(2024)
Athmarajah, Gopikrishna (2024) Localised Failures of Thin Steel Battens Under Extreme Temperature Environments. PhD thesis, Queensland University of Technology.
(2023)
Karapitiye Pathiranage, Indunil Erandi Ariyaratne (2023) Bushfire resistant wall systems using lightweight cement blocks. PhD thesis, Queensland University of Technology.
Hendawitharana, Sahani (2023) Advanced numerical and experimental studies of bushfire safe rooms. PhD thesis, Queensland University of Technology.
Zhao, Ruoqing (2023) Behaviour of valley-fixed cold-formed steel cladding systems under combined wind and fire actions. Master of Philosophy thesis, Queensland University of Technology.
Pieper, Lisa (2023) Cold-formed steel cladding systems exposed to combined wind and bushfire conditions. PhD thesis, Queensland University of Technology.
Vy, Son Tung (2023) Behaviour of light gauge steel framed wall systems made of built-up stud sections under ambient and fire conditions. PhD thesis, Queensland University of Technology.
Abeysiriwardena, Kodikara Arachchillage Tharindu Malinga (2023) Cold-formed steel stud walls subject to distortional buckling failures under ambient and fire conditions. PhD thesis, Queensland University of Technology.
(2022)
Peiris, Mithum Chamara Shan (2022) Behaviour and design of LSF walls subject to combined compression and bending actions under ambient and fire conditions. PhD thesis, Queensland University of Technology.
Krossa, Alexander (2022) Material characteristics of new ultra high-strength steels manufactured by Giflo Steels. Master of Philosophy thesis, Queensland University of Technology.
Pancheti, Jashnav (2022) Fire resistance of external light gauge steel framed wall systems. PhD thesis, Queensland University of Technology.
Mahar, Akshay Mangal (2022) Buckling and post-buckling behaviour of cold-formed steel built-up columns. PhD thesis, Queensland University of Technology.
(2021)
Mahenthirarasa, Rokilan (2021) Cold-formed steel compression members exposed to extreme temperature environments. PhD thesis, Queensland University of Technology.
Tao, Yunxiang (2021) Advanced numerical analysis and fire testing of cold-formed steel hollow section stud walls. PhD thesis, Queensland University of Technology.
(2020)
Gnanachelvam, Sayilacksha (2020) Fire and energy performance of cold-formed steel frame wall systems. PhD thesis, Queensland University of Technology.
Magarabooshanam, Harikrishnan (2020) Fire performance of complex light gauge steel framed wall systems. PhD thesis, Queensland University of Technology.
(2019)
Ahamed, Mohamed Imran (2019) Fire performance and design of CFRP strengthened and insulated cold-formed steel tubular columns. PhD thesis, Queensland University of Technology.
Dias, Hanwellage Yomal Viduranga (2019) Structural and fire behaviour of gypsum plasterboard and steel sheathed LSF walls. PhD thesis, Queensland University of Technology.
Kim, Jimmy (2019) Development of modular building systems made of innovative steel sections and wall configurations. Master of Philosophy thesis, Queensland University of Technology.
Sivaprakasam, Thananjayan (2019) Structural behaviour and design of aluminium facade mullions under wind actions. PhD thesis, Queensland University of Technology.
Steau, Edward (2019) Behaviour of cold-formed light gauge steel frame floor-ceiling systems in fire. PhD thesis, Queensland University of Technology.
(2018)
Dodangoda, Maneesha T. (2018) Improving the fire resistance of cold-formed steel frame wall systems using enhanced plasterboards. PhD thesis, Queensland University of Technology.
Kathekeyan, Myuran (2018) Fatigue performance and design of cold-formed steel roof battens under cyclic wind uplift loads. PhD thesis, Queensland University of Technology.
Perera, Nilakshi (2018) Structural behaviour and design of innovative hollow flange steel plate grinders. PhD thesis, Queensland University of Technology.
(2017)
Balasubramaniam, Janarthanan (2017) Structural behaviour and design of cold-formed steel floor systems. PhD thesis, Queensland University of Technology.
Mohamed Ibralebbe, Mohamed Rusthi (2017) Experimental and finite element studies of light-gauge steel frame wall systems under fire conditions. PhD thesis, Queensland University of Technology.
Siahaan, Ropalin (2017) Structural behaviour and design of rivet fastened rectangular hollow flange channel beams. PhD thesis, Queensland University of Technology.
Sundararajah, Lavan (2017) Web crippling studies of cold-formed steel channel beams (experiments, numerical analyses and design rules). PhD thesis, Queensland University of Technology.
(2016)
Sivapathasundaram, Mayooran (2016) Localised pull-through failures of thin steel roof battens subject to wind uplift loads. PhD thesis, Queensland University of Technology.
(2015)
Jatheeshan, Varathananthan (2015) Numerical and experimental studies of cold-formed steel floor systems made of hollow flange section joists in fire. PhD thesis, Queensland University of Technology.
Kesawan, Sivakumar (2015) Fire performance and design of light gauge steel frame wall systems made of hollow flange sections. PhD thesis, Queensland University of Technology.
Steau, Edward (2015) Web bearing behaviour and design of hollow flange beams. Masters by Research thesis, Queensland University of Technology.
(2013)
Shahanara, Kaniz (2013) Bond strength of steel hollow sections using carbon fibre reinforced polymer composites. Masters by Research thesis, Queensland University of Technology.
(2012)
Baleshan, Balachandren (2012) Numerical and experimental studies of cold-formed steel floor systems under standard fire conditions. PhD thesis, Queensland University of Technology.
(2011)
Gunalan, Shanmuganathan (2011) Structural behaviour and design of cold-formed steel wall systems under fire conditions. PhD thesis, Queensland University of Technology.
Gunawan, Leonardus (2011) Numerical models to simulate the thermal performance of LSF wall panels. Masters by Research thesis, Queensland University of Technology.
Kolarkar, Prakash Nagaraj (2011) Structural and thermal performance of cold-formed steel stud wall systems under fire conditions. PhD thesis, Queensland University of Technology.
(2010)
Anapayan, Tharmarajah (2010) Flexural behaviour and design of hollow flange steel beams. PhD thesis, Queensland University of Technology.
Dolamune Kankanamge, Nirosha (2010) Structural behaviour and design of cold-formed steel beams at elevated temperatures. PhD thesis, Queensland University of Technology.
Jeyaragan, Sivapathasunderam (2010) Flexural behaviour and design of the new built-up LiteSteel beams. PhD thesis, Queensland University of Technology.
Keerthan, Poologanathan (2010) Shear behaviour and design of LiteSteel beams. PhD thesis, Queensland University of Technology.
(2009)
Heva, Yasintha Bandula (2009) Behaviour and design of cold-formed steel compression members at elevated temperatures. PhD thesis, Queensland University of Technology.
(2008)
Sharma, Than Singh (2008) Feasibility and design considerations for the use of lifts as an emergency exit in apartment buildings. PhD thesis, Queensland University of Technology.
(2007)
Kurniawan, Cyrilus Winatama (2007) Flexural behaviour and design of the new LiteSteel beams. Masters by Research thesis, Queensland University of Technology.
(2006)
Ranawaka, Thanuja (2006) Distortional buckling behaviour of cold-formed steel compression members at elevated temperatures. PhD thesis, Queensland University of Technology.
Zhao, Wen-Bin (2006) Behaviour and design of cold-formed steel hollow flange sections under axial compression. PhD thesis, Queensland University of Technology.
(2005)
Darcy, Greg (2005) Structural behaviour of an innovative cold-formed steel building system. PhD thesis, Queensland University of Technology.
Ilahee, Mahbub (2005) Modelling Losses in Flood Estimation. PhD thesis, Queensland University of Technology.
Luxmoore, David Alexander (2005) Evaluation of three Greensmart houses : a comparison with current mainstream housing and sustainable housing. Masters by Research thesis, Queensland University of Technology.
Wanniarachchi, Somadasa (2005) Flexural behaviour and design of cold-formed steel beams with rectangular hollow flanges. PhD thesis, Queensland University of Technology.
(2004)
Lee, Jung Hoon (2004) Local buckling behaviour and design of cold-formed steel compression members at elevated temperatures. PhD thesis, Queensland University of Technology.
Yuan, Zeng (2004) Advanced Analysis of Steel Frame Structures Subjected to Lateral Torsional Buckling Effects. PhD thesis, Queensland University of Technology.
(2003)
Humphreys, Matthew (2003) Development and structural investigation of monocoque fibre composite trusses. PhD thesis, Queensland University of Technology.
Mahaarachchi, Dhammika (2003) Behaviour and design of profiled steel cladding systems subject to pull-through failures. PhD thesis, Queensland University of Technology.
Pokharel, Narayan (2003) Behaviour and design of sandwich panels subject to local buckling and flexural wrinkling effects. PhD thesis, Queensland University of Technology.
(2001)
Telue, Yaip K (2001) Behaviour and design of plasterboard lined cold-formed steel stud wall systems under axial compression. PhD thesis, Queensland University of Technology.
Technical Notes
Topic |
Authors |
Technical Notes |
| Build-up Stud Sections | Son Tung Vy and Mahen Mahendran | Technical Note 1 | Technical Note 2 | Technical Note 3 |