Publications

2019

, , & (2019) Fire resistance of light gauge steel framed wall systems lined with PCM-plasterboards. Fire Safety Journal. (In Press) (https://eprints.qut.edu.au/130722/)

, , & (2019) Behaviour of load bearing double stud LSF walls in fire. Fire Safety Journal. (In Press) (https://eprints.qut.edu.au/129492/)

, , & (2019) Full-scale fire resistance tests of steel and plasterboard sheathed web-stiffened stud walls. Thin-Walled Structures, 137, pp. 81-93. (https://eprints.qut.edu.au/125278/)

, , & (2019) Axial compression strength of gypsum plasterboard and steel sheathed web-stiffened stud walls. Thin-Walled Structures, 134, pp. 203-219. (https://eprints.qut.edu.au/122628/)

, , & (2019) Fire performance of steel and plasterboard sheathed non-load bearing LSF walls. Fire Safety Journal, 103, pp. 1-18. (https://eprints.qut.edu.au/123517/)

& (2019) Influence of cavity insulation on the fire resistance of light gauge steel framed walls. Construction and Building Materials, 203, pp. 687-710. (https://eprints.qut.edu.au/119204/)

2018

& (2018) fire performance of LSF wall systems made of low and high strength steel studs. In 25th Australasian Conference on Mechanics of Structures and Materials (ACMSM25), 4-7 December 2018, Brisbane, Qld. (https://eprints.qut.edu.au/124128/)

& (2018) Post-fire capacity of light gauge steel framed walls. In 25th Australasian Conference on Mechanics of Structures and Materials (ACMSM25), 4-7 December 2018, Brisbane, Qld. (https://eprints.qut.edu.au/124127/)

, , & (2018) Experimental and numerical investigations of CFRP strengthned short SHS steel columns. Engineering Structures, 175, pp. 879-894. (https://eprints.qut.edu.au/120955/)

, , & (2018) Pull-through capacities of cold-formed steel roof battens considering loading rate sensitivity. Engineering Structures, 177, pp. 459-472. (https://eprints.qut.edu.au/122310/)

, , & (2018) Heat transfer modelling of CFRP strengthened and insulated steel tubular columns. Construction and Building Materials, 184, pp. 278-294. (https://eprints.qut.edu.au/120467/)

& (2018) Fatigue design of thin-walled steel roof battens. In Australasian Structural Engineering Conference (ASEC 2018), 25-28 September 2018, Adelaide, S.A. (https://eprints.qut.edu.au/123086/)

& (2018) Low-high-low cyclic tests of steel roof batten systems. In Australasian Structural Engineering Conference (ASEC 2018), 25-28 September 2018, Adelaide, S.A. (https://eprints.qut.edu.au/123087/)

& (2018) Section moment capacity tests of hollow flange steel plate girders. Journal of Constructional Steel Research, 148, pp. 97-111. (https://eprints.qut.edu.au/120921/)

& (2018) Fire performance of load bearing LSF wall systems made of low strength steel studs. Thin-Walled Structures, 130, pp. 487-504. (https://eprints.qut.edu.au/119203/)

, , , & (2018) Thermal characterisation and fire performance of phase change material incorporated plasterboards. In 10th International Conference on Structures in Fire, 6-8 June 2018, Belfast, Northern Ireland. (https://eprints.qut.edu.au/119445/)

, , & (2018) Fire tests of load bearing double stud LSF walls. In 10th International Conference on Structures in Fire, 6-8 June 2018, Belfast, UK. (https://eprints.qut.edu.au/119206/)

, , & (2018) Mechanical properties of cold-formed steel tubular sections at elevated temperatures. Journal of Constructional Steel Research, 143, pp. 131-147. (https://eprints.qut.edu.au/116859/)

& (2018) Experimental study of non-load bearing light gauge steel framed walls in fire. Journal of Constructional Steel Research, 145, pp. 529-551. (https://eprints.qut.edu.au/117218/)

2017

& (2017) Numerical studies and design of thin steel roof battens subject to pull-through failures. Engineering Structures, 146(1), pp. 54-74. (https://eprints.qut.edu.au/107544/)

, , , & (2017) Investigating the fire performance of LSF wall systems using finite element analyses. Journal of Structural Fire Engineering, 8(4), pp. 354-376. (https://eprints.qut.edu.au/109437/)

, , & (2017) Thermal modelling of load bearing cold-formed steel frame walls under realistic design fire conditions. Advanced Steel Construction, 13(2), pp. 160-189. (https://eprints.qut.edu.au/98417/)

, , , & (2017) Fire tests of Magnesium Oxide board lined light gauge steel frame wall systems. Fire Safety Journal, 90, pp. 15-27. (https://eprints.qut.edu.au/105508/)

& (2017) Fire tests of non-load bearing light gauge steel frame walls lined with calcium silicate boards and gypsum plasterboards. Thin-Walled Structures, 115, pp. 86-99. (https://eprints.qut.edu.au/104334/)

& (2017) Numerical modeling of thin-walled steel roof battens subject to pull-through failures. Journal of Structural Engineering. (In Press) (https://eprints.qut.edu.au/103588/)

, , , & (2017) Compression tests of built-up cold-formed steel hollow flange sections. Thin-Walled Structures, 116, pp. 180-193. (https://eprints.qut.edu.au/107600/)

& (2017) Energy-based time equivalent approach to determine the fire resistance ratings of light gauge steel frame walls exposed to realistic design fire curves. Journal of Structural Fire Engineering, 8(1), pp. 46-72. (https://eprints.qut.edu.au/87014/)

& (2017) Fire performance of LSF walls made of hollow flange channel studs. Journal of Structural Fire Engineering, 8(2). (https://eprints.qut.edu.au/105430/)

, , & (2017) New design rules for lipped channel beams subject to web crippling under two-flange load cases. Thin-Walled Structures. (In Press) (https://eprints.qut.edu.au/108039/)

& (2017) Section compression capacity of high strength cold-formed hollow flange channels. Journal of Constructional Steel Research, 133, pp. 202-213. (https://eprints.qut.edu.au/107597/)

Wanniarachchi, K.S., , & (2017) Shear behavior and design of lipped channel beams with non-circular web openings. Thin-Walled Structures. (In Press) (https://eprints.qut.edu.au/107603/)

, , & (2017) Web crippling experiments of high strength lipped channel beams under one-flange loading. Journal of Constructional Steel Research, 138, pp. 851-866. (https://eprints.qut.edu.au/108043/)

2016

, , & (2017) Web crippling study of rivet fastened rectangular hollow flange channel beams with flanges fastened to supports. Advances in Structural Engineering, 20(7), pp. 1059-1073. (https://eprints.qut.edu.au/97988/)

& (2016) Experimental studies of thin-walled steel roof battens subject to pull-through failures. Engineering Structures, 113, pp. 388-406. (https://eprints.qut.edu.au/96569/)

, , & (2016) Finite element modeling of rivet fastened rectangular hollow flange channel beams subject to local buckling. Engineering Structures, 126, pp. 311-327. (https://eprints.qut.edu.au/98016/)

, , & (2016) Detrimental effects of plasterboard joints on the fire resistance of light gauge steel frame walls. Thin-Walled Structures, 107, pp. 597-611. (https://eprints.qut.edu.au/98416/)

& (2016) Development of fragility curves for localised pull-through failures of thin steel roof battens. Engineering Structures, 124, pp. 64-84. (https://eprints.qut.edu.au/96571/)

, , & (2016) Experimental studies of lipped channel beams subject to web crippling under two-flange load cases. Journal of Structural Engineering, 142(9). (https://eprints.qut.edu.au/93988/)

& (2016) Fire design rules to predict the moment capacities of thin-walled floor joists subject to non-uniform temperature distributions. Thin-Walled Structures, 105(August), pp. 29-43. (https://eprints.qut.edu.au/105426/)

& (2016) Experimental study of light gauge steel framing floor systems under fire conditions. Advances in Structural Engineering, 20(3), pp. 426-445. (https://eprints.qut.edu.au/105427/)

& (2016) Shear tests of rivet fastened rectangular hollow flange channel beams. Journal of Constructional Steel Research, 121, pp. 330-340. (https://eprints.qut.edu.au/93993/)

& (2016) Numerical study of high strength LSF floor systems in fire. Thin-Walled Structures, 101(April), pp. 85-99. (https://eprints.qut.edu.au/105428/)

& (2016) Experimental study on web crippling strength of hollow flange channels under end-one-flange and interior-one-flange load cases. Advances in Structural Engineering, 19(6), pp. 966-981. (https://eprints.qut.edu.au/93991/)

, , & (2016) Web crippling tests of hollow flange channel beams with flanges fastened to supports under two flange load cases. Steel and Composite Structures. (In Press) (https://eprints.qut.edu.au/93992/)

& (2016) Predicting the performance of LSF walls made of hollow flange channel sections in fire. Thin-Walled Structures, 98 Part A, pp. 111-126. (https://eprints.qut.edu.au/89633/)

& (2016) Development of suitable test methods for the screw connections in cold-formed steel roof battens. Journal of Structural Engineering, 142(6), Article Number-04016025. (https://eprints.qut.edu.au/96567/)

& (2016) Experimental study of cold-formed steel floors made of hollow flange channel section joists under fire conditions. Journal of Structural Engineering, 142(2), Article Number-04015134. (https://eprints.qut.edu.au/87962/)

& (2016) Fire design of LSF floors using hollow flange channel joists. Journal of Constructional Steel Research, 125, pp. 263-278. (https://eprints.qut.edu.au/105407/)

& (2016) Fire design rules for LSF walls made of hollow flange channel sections. Thin-Walled Structures, 107, pp. 300-314. (https://eprints.qut.edu.au/96260/)

& (2016) Fire resistance of LSF floors made of hollow flange channels. Fire Safety Journal, 84, pp. 8-24. (https://eprints.qut.edu.au/105405/)

, , & (2016) Section moment capacity tests of rivet fastened rectangular hollow flange channel beams. Journal of Constructional Steel Research, 125, pp. 252-262. (https://eprints.qut.edu.au/98797/)

& (2016) Thermal performance of load-bearing walls made of cold-formed hollow flange channel sections in fire. Fire and Materials, 40(5), pp. 704-730. (https://eprints.qut.edu.au/96258/)

, , & (2016) Thermal performance of LSF floors made of hollow flange channel section joists under fire conditions. Fire Safety Journal, 84, pp. 25-39. (https://eprints.qut.edu.au/105406/)

, , & (2016) Web crippling capacities of rivet fastened rectangular hollow flange channel beams under one flange load cases. Steel Construction Design and Research, 9(3), pp. 222-239. (https://eprints.qut.edu.au/97864/)

2015

& (2015) Numerical modelling of rivet fastened rectangular hollow flange channel beams subject to shear. In 8th International Conference on Advances in Steel Structures (ICASS 2015), 22-24 July 2015, Lisbon, Portugal. (https://eprints.qut.edu.au/93996/)

, , & (2015) Bearing capacity of cold-formed unlipped channels with restrained flanges under EOF and IOF load cases. Steel Construction Design and Research, 8(3), pp. 146-154. (https://eprints.qut.edu.au/89631/)

& (2015) Fire design rules for load bearing cold-formed steel frame walls exposed to realistic design fire curves. Fire Safety Journal, 77, pp. 1-20. (https://eprints.qut.edu.au/86508/)

& (2015) Fire tests of load-bearing LSF walls made of hollow flange channel sections. Journal of Constructional Steel Research, 115, pp. 191-205. (https://eprints.qut.edu.au/96257/)

& (2015) Behaviour and strength of hollow flange channel sections under torsion and bending. Thin-walled Structures, 94, pp. 612-623. (https://eprints.qut.edu.au/87022/)

& (2015) Experimental investigation and design of lipped channel beams in shear. Thin-Walled Structures, 86, pp. 174-184. (https://eprints.qut.edu.au/76474/)

& (2015) Improved shear design rules of cold-formed steel beams. Engineering Structures, 99, pp. 603-615. (https://eprints.qut.edu.au/87026/)

, Bandula Heva, Yasintha, & (2015) Local buckling studies of cold-formed steel compression members at elevated temperatures. Journal of Constructional Steel Research, 108, pp. 31-45. (https://eprints.qut.edu.au/84090/)

& (2015) Web crippling tests of cold-formed steel channels under two flange load cases. Journal of Constructional Steel Research, 110, pp. 1-15. (https://eprints.qut.edu.au/84086/)

& (2015) Bending and torsion of hollow flange channel beams. Engineering Structures, 84, pp. 300-312. (https://eprints.qut.edu.au/87023/)

, , & (2015) Bearing capacity of cold-formed unlipped channels with restrained flanges under EOF and IOF load cases. Steel Construction Design and Research, 8(3), pp. 146-154. (https://eprints.qut.edu.au/89631/)

, , & (2015) Elevated temperature mechanical properties of hollow flange channel sections. Construction and Building Materials, 87, pp. 86-99. (https://eprints.qut.edu.au/89632/)

& (2015) Improving the shear capacities of lipped channel beams with web openings using plate stiffeners. Journal of Structural Engineering, 141(11), 04015022-1. (https://eprints.qut.edu.au/76476/)

& (2015) Numerical study of LSF floors made of hollow flange channels in fire. Journal of Constructional Steel Research, 115, pp. 236-251. (https://eprints.qut.edu.au/87961/)

, , & (2015) Shear tests of hollow flange channel beams with real support conditions. Structures, 3, pp. 109-119. (https://eprints.qut.edu.au/86134/)

, , & (2015) Web crippling tests of rivet fastened rectangular hollow flange channel beams under two flange load cases. Thin-Walled Structures, 95, pp. 262-275. (https://eprints.qut.edu.au/86133/)

2014

& (2014) Numerical modelling of load bearing light gauge steel frame wall systems exposed to realistic design fires. Thin-Walled Structures, 78, pp. 148-170. (https://eprints.qut.edu.au/67941/)

& (2014) Development of realistic design fire time-temperature curves for the testing of cold-formed steel wall system. Frontiers of Structural and Civil Engineering, 8(4), pp. 427-447. (https://eprints.qut.edu.au/78871/)

& (2014) Experimental study of load-bearing cold-formed steel walls exposed to realistic design fires. Journal of Structural Fire Engineering, 5(4), pp. 291-330. (https://eprints.qut.edu.au/78856/)

& (2014) Development of realistic design fire time-temperature curves for the testing of cold-formed steel wall system. Frontiers of Structural and Civil Engineering, 8(4), pp. 427-447. (https://eprints.qut.edu.au/78871/)

& (2014) Experimental investigation of post-fire mechanical properties of cold-formed steels. Thin-Walled Structures, 84, pp. 241-254. (https://eprints.qut.edu.au/74916/)

& (2014) Thermal performance of load bearing cold-formed steel walls under fire conditions using numerical studies. Journal of Structural Fire Engineering, 5(3), pp. 261-289. (https://eprints.qut.edu.au/60808/)

, , & (2014) Experimental studies on web crippling behaviour of hollow flange channel beams under two flange load cases. Thin-Walled Structures, 85, pp. 207-219. (https://eprints.qut.edu.au/76471/)

& (2014) Numerical modelling of load bearing light gauge steel frame wall systems exposed to realistic design fires. Thin-Walled Structures, 78, pp. 148-170. (https://eprints.qut.edu.au/67941/)

& (2014) Fire performance of cold-formed steel wall panels and prediction of their fire resistance rating. Fire Safety Journal, 64, pp. 61-80. (https://eprints.qut.edu.au/69714/)

& (2014) Review of current fire design rules for cold-formed steel wall systems. Journal of Fire Sciences, 32(1), pp. 3-34. (https://eprints.qut.edu.au/60675/)

& (2014) Experimental and numerical studies of fire exposed lipped channel columns subject to distortional buckling. Fire Safety Journal, 70, pp. 34-45. (https://eprints.qut.edu.au/76345/)

& (2014) Experimental studies of gypsum plasterboards and composite panels under fire conditions. Fire and Materials, 38(1), pp. 13-35. (https://eprints.qut.edu.au/53678/)

, , & (2014) Experimental studies of hollow flange channel beams subject to combined bending and shear actions. Thin-Walled Structures, 77, pp. 129-140. (https://eprints.qut.edu.au/64438/)

, , & (2014) Flexural–torsional buckling behaviour and design of cold-formed steel compression members at elevated temperatures. Engineering Structures, 79, pp. 149-168. (https://eprints.qut.edu.au/76312/)

& (2014) Improved shear design rules for lipped channel beams with web openings. Journal of Constructional Steel Research, 97, pp. 127-142. (https://eprints.qut.edu.au/60810/)

, , & (2014) Numerical studies and design of hollow flange channel beams subject to combined bending and shear actions. Engineering Structures, 75, pp. 197-212. (https://eprints.qut.edu.au/70516/)

2013

& (2013) Shear buckling characteristics of cold-formed steel channel beams. International Journal of Steel Structures, 13(3), pp. 385-399. (https://eprints.qut.edu.au/55965/)

& (2013) Experimental studies of the shear behavior and strength of LiteSteel beams with stiffened web openings. Engineering Structures, 49, pp. 840-854. (https://eprints.qut.edu.au/55953/)

, , & (2013) Experimental study of load bearing cold-formed steel wall systems under fire conditions. Thin-Walled Structures, 65, pp. 72-92. (https://eprints.qut.edu.au/60671/)

& (2013) New design rules for the shear strength of LiteSteel Beams with web openings. Journal of Structural Engineering, 139(5), pp. 640-656. (https://eprints.qut.edu.au/48918/)

& (2013) Development of improved fire design rules for cold-formed steel wall systems. Journal of Constructional Steel Research, 88, pp. 339-362. (https://eprints.qut.edu.au/60676/)

& (2013) Experimental studies of the shear behaviour and strength of lipped channel beams with web openings. Thin-Walled Structures, 73, pp. 131-144. (https://eprints.qut.edu.au/60809/)

& (2013) Finite element modelling of load bearing cold-formed steel wall systems under fire conditions. Engineering Structures, 56, pp. 1007-1027. (https://eprints.qut.edu.au/60674/)

& (2013) Improved design rules for fixed ended cold-formed steel columns subject to flexural-torsional buckling. Thin-Walled Structures, 73, pp. 1-17. (https://eprints.qut.edu.au/60679/)

2012

Kolarkar, Prakash & (2012) Experimental studies of non-load bearing steel wall systems under fire conditions. Fire Safety Journal, 53, pp. 85-104. (https://eprints.qut.edu.au/53219/)

& (2012) Numerical modelling of non-load bearing light gauge cold-formed steel frame walls under fire conditions. Journal of Fire Sciences, 30(5), pp. 375-403. (https://eprints.qut.edu.au/48951/)

Seo, Jung Kwan & (2012) Member moment capacities of mono-symmetric LiteSteel beam floor joists with web openings. Journal of Constructional Steel Research, 70(March), pp. 153-166. (https://eprints.qut.edu.au/49377/)

& (2012) Shear behaviour and strength of LiteSteel Beams with web openings. Advances in Structural Engineering, 15(2), pp. 197-210. (https://eprints.qut.edu.au/48919/)

Dolamune Kankanamge, Nirosha & (2012) Behaviour and design of cold-formed steel beams subject to lateral-torsional buckling. Thin-Walled Structures, 51(1), pp. 25-28. (https://eprints.qut.edu.au/49378/)

Kolarkar, Prakash & (2012) Experimental studies of non-load bearing steel wall systems under fire conditions. Fire Safety Journal, 53, pp. 85-104. (https://eprints.qut.edu.au/53219/)

& (2012) Flexural-torsional buckling tests of cold-formed steel compression members at elevated temperatures. Steel and Composite Structures, 14(3), pp. 205-227. (https://eprints.qut.edu.au/56495/)

& (2012) Improved design rules for hollow flange sections subject to lateral distortional buckling. Thin-Walled Structures, 50(1), pp. 128-140. (https://eprints.qut.edu.au/49370/)

& (2012) Numerical modelling and design of LiteSteel Beams subject to lateral buckling. Journal of Constructional Steel Research, 70, pp. 51-64. (https://eprints.qut.edu.au/49371/)

& (2012) Numerical studies of gypsum plasterboard panels under standard fire conditions. Fire Safety Journal, 53(Oct), pp. 105-119. (https://eprints.qut.edu.au/53448/)

, , , & (2012) Raman spectroscopic study of the mineral xonotlite Ca 6Si 6O 17(OH) 2-A component of plaster boards. Materials Research Bulletin, 47(11), pp. 3644-3649. (https://eprints.qut.edu.au/52661/)

& (2012) Thermal performance of composite panels under fire conditions using numerical studies : plasterboards, rockwool, glass fibre and cellulose insulations. Fire Technology, 49(2), pp. 329-356. (https://eprints.qut.edu.au/57922/)

2011

& (2011) Numerical Modelling of LiteSteel Beams Subject to Shear. Journal of Structural Engineering, 137(12), pp. 1428-1439. (https://eprints.qut.edu.au/48916/)

Kurniawan, Cyrilus Winatama & (2011) Elastic lateral buckling of cantilever LiteSteel beams under transverse loading. International Journal of Steel Structures, 11(4), pp. 395-407. (https://eprints.qut.edu.au/49379/)

Seo, Jung Kwan, , & Paik, Jeom Kee (2011) Numerical method for predicting the elastic lateral distortional buckling moment of a mono-symmetric beam with web openings. Thin-Walled Structures, 49(6), pp. 713-723. (https://eprints.qut.edu.au/49375/)

& (2011) Mechanical properties of cold-formed steels at elevated temperatures. Thin-Walled Structures, 49(1), pp. 26-44. (https://eprints.qut.edu.au/43163/)

Lee, Chi Seung, Kim, Myung Hyun, Lee, Jae Myung, & (2011) Computational study on the fatigue behavior of welded structures. International Journal of Damage Mechanics, 20(3), pp. 423-463. (https://eprints.qut.edu.au/44939/)

Seo, Jung Kwan & (2011) Plastic bending behaviour and section moment capacities of mono-symmetric LiteSteel Beams with web openings. Thin-Walled Structures, 49(4), pp. 513-522. (https://eprints.qut.edu.au/49372/)

, , & (2011) Section moment capacity tests of LiteSteel Beams. Thin-Walled Structures, 49(4), pp. 502-512. (https://eprints.qut.edu.au/49369/)

2010

& (2010) Experimental studies on the shear behaviour and strength of LiteSteel Beams. Engineering Structures, 32(10), pp. 3235-3247. (https://eprints.qut.edu.au/34163/)

& (2010) Elastic shear buckling characteristics of LiteSteel Beams. Journal of Constructional Steel Research, 66(11), pp. 1309-1319. (https://eprints.qut.edu.au/34161/)

& (2010) Numerical modelling of light gauge cold-formed steel compression members subjected to distortional buckling at elevated temperatures. Thin-Walled Structures, 48(4-5), pp. 334-344. (https://eprints.qut.edu.au/43233/)

2009

& (2009) Lateral buckling strength of simply supported LiteSteel beams subject to moment gradient effects. Journal of Structural Engineering, 135(9), pp. 1058-1067. (https://eprints.qut.edu.au/30255/)

& (2009) Elastic lateral buckling of simply supported LiteSteel beams subject to transverse loading. Thin-Walled Structures, 47(1), pp. 109-119. (https://eprints.qut.edu.au/30254/)

& (2009) Experimental study of the mechanical properties of light gauge cold-formed steels at elevated temperatures. Fire Safety Journal, 44(2), pp. 219-229. (https://eprints.qut.edu.au/30252/)

& (2009) Distortional buckling tests of cold-formed steel compression members at elevated temperatures. Journal of Constructional Steel Research, 65(2), pp. 249-259. (https://eprints.qut.edu.au/30253/)

& (2009) A strain criterion for pull-through failures in crest-fixed steel claddings. Engineering Structures, 31(2), pp. 498-506. (https://eprints.qut.edu.au/30251/)

& (2009) Wind uplift strength of trapezoidal steel cladding with closely spaced ribs. Journal of Wind Engineering and Industrial Aerodynamics, 97(3-4), pp. 140-150. (https://eprints.qut.edu.au/42880/)

2008

& (2008) Development of a new cold-formed steel building system. Advances in Structural Engineering, 11(6), pp. 661-677. (https://eprints.qut.edu.au/17015/)

& (2008) Local Buckling Design Rules for Profiled Sandwich Panels based on the Studies of Foam–filled Steel Beams. Australian Journal of Structural Engineering, 8(3), pp. 249-258. (https://eprints.qut.edu.au/16950/)

, Jayasinghe, Thishan R., & (2008) Self Sufficiency of Water in Mainstream Housing - an Australian Experience. Asian Journal of Water, Environment and Pollution, 5(1), pp. 67-74. (https://eprints.qut.edu.au/16949/)

2006

& (2006) Design of Cold-formed Steel Wall Frames Lined with Plasterboard on One Side under Axial Compression. International Journal of Steel Structures, 6(1), pp. 1-12. (https://eprints.qut.edu.au/7614/)

2005

, Jayasinghe, Thishan R., & (2005) Mitigating temperature increases in high lot density sub-tropical residential developments. Energy and Buildings, 37(12), pp. 1212-1224. (https://eprints.qut.edu.au/2759/)

& (2005) An Investigation of Lightly Profiled Sandwich Panels subject to Local Buckling and Flexural Wrinkling Effects. Journal of Constructional Steel Research, 61(7), pp. 984-1006. (https://eprints.qut.edu.au/976/)

& (2005) Effects of Plate Slenderness on the Ultimate Strength Behaviour of Foam Supported Steel Plate Elements. Structural Engineering and Mechanics, 21(4), pp. 407-422. (https://eprints.qut.edu.au/7626/)

& (2005) Strength of Screwed Connections in Crest-fixed Trapezoidal Steel Claddings. Australian Journal of Structural Engineering, 6(1), pp. 11-23. (https://eprints.qut.edu.au/7625/)

& (2004) Finite element analysis and design of crest-fixed trapezoidal steel claddings with wide pans subject to pull-through failures. Engineering Structures, 26(11), pp. 1547-1559. (https://eprints.qut.edu.au/7621/)

2004

& (2004) Numerical modelling and design of unlined cold-formed steel wall frames. Journal of Constructional Steel Research, 60(8), pp. 1241-1256. (https://eprints.qut.edu.au/87020/)

& (2004) Behaviour and Design of Cold-formed Steel Wall Frames Lined With Plasterboard on Both Sides. Engineering Structures, 26(5), pp. 567-579. (https://eprints.qut.edu.au/6767/)

& (2004) Finite element analysis and design of sandwich panels subject to local buckling effects. Thin-Walled Structures, 42(4), pp. 589-611. (https://eprints.qut.edu.au/410/)

& (2004) Splitting Failures in Trapezoidal Steel Roof Cladding. Journal of Performance of Constructed Facilities, 18(1), pp. 4-11. (https://eprints.qut.edu.au/7623/)

Jayasinghe, Thishan, , & (2004) Improvements to Portal Frame Design using Stressed Skin Action of Sandwich Panels. Australian Journal of Structural Engineering, 5(3), pp. 199-210. (https://eprints.qut.edu.au/7624/)

& (2004) Local Buckling Behaviour and Design of Profiled Sandwich Panels. Australian Journal of Structural Engineering, 5(3), pp. 185-198. (https://eprints.qut.edu.au/467/)

Albermani, Faris, Kitipornchai, S, & (2004) Upgrading of Transmission Towers using a Diaphragm Bracing System. Engineering Structures, 26, pp. 735-744. (https://eprints.qut.edu.au/22473/)

2003

& (2003) Experimental investigation and design of sandwich panels subject to local buckling effects. Journal of Constructional Steel Research, 59(12), pp. 1533-1552. (https://eprints.qut.edu.au/409/)

& (2003) Ultimate Capacity of Innovative Cold-formed Steel Columns. Journal of Constructional Steel Research, 59(4), pp. 489-508. (https://eprints.qut.edu.au/7620/)

& (2003) Flexural Wrinkling Strength of Lightly Profiled Sandwich Panels with Transverse Joints in the Foam Core. Advances in Structural Engineering, 6(4), pp. 325-337. (https://eprints.qut.edu.au/7619/)

& (2003) Large Deflection Analysis of Skew Plates using Hybrid/Mixed Finite Element Method. Computers and Structures, 81, pp. 1415-1424. (https://eprints.qut.edu.au/23539/)

2002

& (2002) Cyclic Pull-out Strength of Screwed Connections in Steel Roof and Wall Cladding Systems Using Thin Steel Battens. Journal of Structural Engineering, 128(6), pp. 771-778. (https://eprints.qut.edu.au/7615/)

& (2002) Comparative life cycle costs for new steel portal frame building systems. Building Research and Information, 30(1), pp. 35-45. (https://eprints.qut.edu.au/22878/)

& (2002) Development of an Advanced Analysis Method for Steel Frame Structures Subjected to Lateral Torsional Buckling. In Lamas, A & Simoes da Silva, L (Eds.) Proceedings of the 3rd European Conference on Steel Structures, 19 - 20 September 2002, Coimbra, Portugal. (https://eprints.qut.edu.au/24774/)

& (2002) Distortional buckling behaviour of innovative cold-formed steel columns. In Lamas, A & Simoes da Silva, L (Eds.) Proceedings of the 3rd European Conference on Steel Structures, 19 - 20 September 2002, Coimbra, Portugal. (https://eprints.qut.edu.au/24633/)

& (2002) Finite Element Analysis and Design of Unlined Cold-formed Steel Wall Frames. In Lamas, A & Simoes da Silva, L (Eds.) Proceedings of the 3rd European Conference on Steel Structures Volume 1, 19 - 20 September 2002, Coimbra, Portugal. (https://eprints.qut.edu.au/25764/)

& (2002) Full-scale Tests and Analytical Modelling of an Innovative Cold-formed Steel Building System. In et al, Grundy (Ed.) Proceedings of the IABSE Symposium Melbourne 2002 - Towards a Better Built Environment, 11 - 13 September 2002, Melbourne, Victoria. (https://eprints.qut.edu.au/24759/)

& (2002) Improved Numerical Modelling of Crest-fixed Steel Cladding Systems Subject to Pull-through Failures. In Lamas, A & Simoes da Silva, L (Eds.) Proceedings of the 3rd European Conference on Steel Structures, 19 - 20 September 2002, Coimbra, Portugal. (https://eprints.qut.edu.au/24919/)

& (2002) Local Buckling Behaviour of Cold-formed Steel Compression Members at Elevated Temperatures. In Proceedings of the 17th Australasian Conference on the Mechanics of Structures and Materials, 12 - 14 June 2002, Gold Coast, Qld. (https://eprints.qut.edu.au/24263/)

, , & (2002) Mechanical Properties of Light Gauge Steels at Elevated Temperatures. In Proceedings of the 2nd International Conference on Advances in Structural Engineering and Mechanics, 21 - 23 August 2002, Busan, Korea. (https://eprints.qut.edu.au/24743/)

& (2002) Numerical and Experimental Studies of an Innovative Cold-formed Steel Building Systems. In Proceedings of the 16th International Specialty Conference on Cold-formed Steel Structures, 17 - 18 October 2002, Orlando, USA. (https://eprints.qut.edu.au/24980/)

& (2002) Numerical Modelling of Sandwich Panels Subject to Local Buckling. In Proceedings of the 17th Australasian Conference on the Mechanics of Structures and Materials, 12 - 14 June 2002, Gold Coast, Qld. (https://eprints.qut.edu.au/25692/)

& (2002) Predicting the ultimate capacity of innovative cold-formed steel columns. In Proceedings of the 17th Australasian Conference on the Mechanics of Structures and Materials, 12 - 14 June 2002, Gold Coast, Queensland. (https://eprints.qut.edu.au/24382/)

& (2002) Shear Strength of Sandwich Panel Systems. Australian Journal of Structural Engineering, 3(3), pp. 115-126. (https://eprints.qut.edu.au/7617/)

& (2002) Some Improvements to the Design of Sandwich Panels Subject to Local Buckling Effects. In Proceedings of the 16th International Specialty Conference Recent Research and Developments in Cold-formed Steel Structures, 17 - 18 October 2002, Orlando, USA. (https://eprints.qut.edu.au/25233/)

& (2002) Structural Behaviour of Self-Piercing Riveted Connections in Steel Framed Housing. In Proceedings of the 16th International Specialty Conference on Cold-formed Steel Structures, 17 - 18 October 2002, Orlando, USA. (https://eprints.qut.edu.au/24166/)

& (2002) Use of Nonlinear Hybrid/mixed Shell element for Steel Cladding Systems. In Loo, Y, Chowdhury, S, & Fragomeni, S (Eds.) Proceedings of the 17th Australasian Conference on the Mechanics of Structures and Materials, 12 - 14 June 2002, Gold Coast, Australia. (https://eprints.qut.edu.au/24530/)

2001

& (2001) Behaviour of Cold-formed Steel Wall Frames Lined with Plasterboard. Journal of Constructional Steel Research, 57(4), pp. 435-452. (https://eprints.qut.edu.au/412/)

(2001) Design of steel roof and wall cladding systems for pull-out failures. Steel Construction, 35(1), pp. 14-27. (https://eprints.qut.edu.au/85338/)

& (2001) Behaviour and Design of Valley-Fixed Steel Cladding Systems. In Proceedings of the 3rd International Conference on Thin-Walled Structures, 5-7 June 2001. (https://eprints.qut.edu.au/24598/)

& (2001) Behaviour of Steel Frame Structures to Lateral Torsional Buckling Effects. In Proceedings of the 9th Nordic Steel Construction Conference, 18-20 June 2001. (https://eprints.qut.edu.au/24903/)

Brook, Jeff & (2001) Buckling behaviour and design of tapered steel lighting masts. Australian Journal of Structural Engineering, 3(1 & 2), pp. 109-113. (https://eprints.qut.edu.au/87051/)

& (2001) Buckling Behaviour of Thin-Walled Compression Members at Elevated Temperatures. In Proceedings of the 6th Pacific Structural Steel Conference: Volume 1, 15-17 October 2001. (https://eprints.qut.edu.au/24632/)

& (2001) Effects of Fluctuating Wind Uplift Loading on the Pull-Out Strength of Steel Cladding Systems. In Proceedings of the International Conference on Building Envelope Systems and Technologies: Volume 1, 25-29 June 2001. (https://eprints.qut.edu.au/25507/)

& (2001) Effects of foam joints on the flexural wrinkling strength of sandwich panels. International Journal of Steel Structures, 1(2), pp. 105-112. (https://eprints.qut.edu.au/7616/)

& (2001) A Failure Criterion for the Local Failures in High Tensile Steel Roofing Systems. In Proceedings of the International Conference on Building Envelope Systems and Technologies: Volume 2, 25-29 June 2001. (https://eprints.qut.edu.au/24951/)

& (2001) Full Scale Tests of a New Cold-Formed Steel Building System. In Proceedings of the 9th Nordic Steel Construction Conference, 18-20 June 2001. (https://eprints.qut.edu.au/25504/)

& (2001) Local Buckling Behaviour of Sandwich Panels. In Proceedings of the 3rd International Conference on Thin-Walled Structures, 5-7 June 2001. (https://eprints.qut.edu.au/24525/)

(2001) Local Dimpling Behaviour of Corrugated Steel Roof Cladding. In Proceedings of the 9th Nordic Steel Construction Conference, 18-20 June 2001. (https://eprints.qut.edu.au/23887/)

& (2001) Numerical Modelling of Cold-Formed Steel Members with Torsionally Rigid Flanges. In Proceedings of the 6th Pacific Structural Steel Conference: Volume 1, 15-17 October 2001. (https://eprints.qut.edu.au/25134/)

& (2001) Pull-Out Failures of Steel Cladding Systems: Proceedings of the Australasian Structural Engineering Conference: Volume 2. In Proceedings of the Australasian Structural Engineering Conference: Volume 2, 29 April - 2 May 2001. (https://eprints.qut.edu.au/25006/)

& (2001) A Sensitivity Study in Advanced Analysis of Steel Frames Comprising Non-Compact Sections. In Hawaii, U (Ed.) Creative Systems in Structural and Construction Engineering, 24-27 January 2001. (https://eprints.qut.edu.au/24684/)

, , & (2001) Steel Design Tools Using Internet Technologies. In Proceedings of the Australasian Structural Engineering Conference: Volume 2, 29 April - 2 May 2001. (https://eprints.qut.edu.au/24818/)

2000

& (2000) Refined Plastic Hinge Analysis of Steel Frame Structures Comprising Non-Compact Sections: I: Formulation. Advances in Structural Engineering, 3(4), pp. 291-307. (https://eprints.qut.edu.au/87091/)

Avery, P. & (2000) Refined plastic hinge analysis of steel frame structures comprising non-compact sections : II : verification. Advances in Structural Engineering, 3(4), pp. 309-325. (https://eprints.qut.edu.au/61751/)

& (2000) Pseudo plastic zone analysis of steel frame structures comprising non-compact sections. Structural Engineering and Mechanics, 10(4), pp. 371-392. (https://eprints.qut.edu.au/64402/)

& (2000) Analytical benchmark solutions for steel frame structures subject to local buckling effects. Advances in Structural Engineering, 3(3), pp. 215-229. (https://eprints.qut.edu.au/61752/)

& (2000) Distributed plasticity analysis of steel frame structures comprising non-compact sections. Engineering Structures, 22(8), pp. 901-919. (https://eprints.qut.edu.au/64401/)

& (2000) Large-scale testing of steel frame structures comprising non-compact sections. Engineering Structures, 22(8), pp. 920-936. (https://eprints.qut.edu.au/64403/)

& Mahaarachchi, D. (2000) Cyclic pull-out strength of steel roof and wall cladding systems. In Roger, LaBoube & Wei-Wen, Yu (Eds.) Fifteenth International Specialty Conference on Cold-Formed Steel Structures, 19-20 October 2000, St. Louis, Missouri U.S.A. (https://eprints.qut.edu.au/64407/)

& (2000) Pull-through failures of crest-fixed steel claddings initiated by transverse splitting. In 15th International Specialty Conference on Cold-Formed Steel Structures, 19-20 October 2000, St. Louis, Missouri. (https://eprints.qut.edu.au/64405/)