Md Mahiuddin

    Find Md Mahiuddin on

    2016.09— 2020 Energy and drying, School of Chemistry, Physics and Mechanical Engineering, Queensland University of Technology, Ph.D.

    2012.06—2014.10 M.Sc. in Mechanical Engineering, Dhaka University of Engineering & Technology

    2001.08—2006.11 B.Sc. in Mechanical Engineering, Bangladesh University of Engineering & Technology

    In my early career in March 2007, I’ve started as a Maintenance Engineer at Safe and Advance Engineering and worked under a project of a reputed multinational company named Ericsson-Warid manage operation. After two years in April 2009, I’ve joined as a Lecturer in the mechanical engineering department of Dhaka University of Engineering & Technology, Gazipur, Bangladesh. In September 2012, I’ve promoted to an Assistant Professor in the same university. From September 2016, I’ve got a deputation leave and joined as a Ph.D. student in CPME at QUT under SEF.

    Research Interests: Drying of Food Materials, Heat and Mass Transfer, Solid Mechanics and Deformation, Fracture Mechanics

    Publications: My current and previous publications are summarized below.

    International Journal

    1. M. M. Rahman, Md Mahiuddin, M. A. Karim, (2018). “A Multiscale Model for Investigation of Micro-level Transport and Deformation of Food during Drying” Nature Communication (Submitted)

    2. Md Mahiuddin, Md. Imran H. Khan, C. Kumar, M. M. Rahman, and M. A. Karim, (2018). “Shrinkage of Food Materials during Drying: Current Status and Challenges.” Comprehensive Reviews in Food Science and Food Safety. (Article accepted on 2 June 2018)

    3. Md Mahiuddin, Md. Imran H. Khan, Nghia Duc Pham, M. A. Karim, (2018). “Development of Fractional Viscoelastic Model for Characterizing Viscoelastic Properties of Food Material during Drying.” Journal of Food Bioscience. 23: 45-53

    4. Nghia Duc Pham, Md. Imran H. Khan, M. U. H. Joardder, M. M. Rahman, Md Mahiuddin, A. M. N. Abesinghe, M. A. Karim, (2017). “Quality of plant-based food materials and its prediction during intermittent drying.” Critical Reviews in Food Science and Nutrition: 1-15

    5. Md. Arefin Kowser, Md. Mahiuddin, (2014) “Determination of Constant Parameters of Copper as Power-Law Hardening Material at Different Test Conditions”, International Journal of Applied Mechanics and Engineering, vol.19, No.4, pp.687-698, DOI: 10.2478/ijame-2014-0047.

    6. Md. Arefin Kowser, Md. Mahiuddin, (2014). “Technique for Determining the Constant Parameters of Power-Law Hardening Materials at Different Conditions”, DUET journal of Bangladesh (ISSN 2312-1718), Vol. 3, Issue 1, pp.1-8. 

    International Conference

    7. Md. Mahiuddin, Md. Arefin Kowser,“Investigation of Stress State near The Crack Tip of Central Cracks of Copper by Numerical Analysis”, The 6th BSME International Conference on Thermal Engineering (Paper ID # 66), 19-21 December 2014, Dhaka, Bangladesh.

    8. Md. Arefin Kowser, Md. Mahiuddin, “Technique For Determining the Constant Parameters of Cu as a Power-Law Hardening Material at Different Conditions”, International Conference on Engineering Research, Innovation and Education 2013 (ICERIE 2013), 11-13 January, SUST, Sylhet, Bangladesh.

    9. Md. Arefin Kowser, Md. Mahiuddin, “A Technique for determining the Near-tip fields of a crack in a Power- law Hardening Material Using Asymptotic Analysis”, International Conference on Mechanical, Industrial and Materials Engineering 2013 (ICMIME-2013, MS – 41), 1-3 November 2013, RUET, Rajshahi, Bangladesh.

    10. Md. Arefin Kowser, Md. Mahiuddin, “Technique For Determining the Constant Parameters of Power-Law Hardening Material by Tensile Test”, Proceedings of the 6th International Mechanical Engineering Conference & 14th Annual Paper Meet (IMEC & 14 APM, MS – 14), 28-29 September 2012, Dhaka, Bangladesh.

    11. Md. Imran Hossen Khan, Hasan M.M. Afroz, Md. Mahiuddin, (2012) “Experimental investigation of effect of Phase Change Material on Evaporating Pressure of Household Refrigerator” Proceedings of the 6th International Mechanical Engineering Conference & 14th Annual Paper Meet (IMEC & 14 APM, HT – 09) 28-29 September 2012, Dhaka, Bangladesh.

    Book chapter

    12. Kumar, Chandan, Putranto, A., Mahiuddin, Md., Saha, Suvash, Gu, YuanTong, & Karim, Azharul (2017). “Mathematical modelling of intermittent drying”. In Karim, Azharul & Law, Chung-Lim (Eds.) Intermittent and Nonstationary Drying Technologies: Principles and Applications. CRC Press (Taylor & Francis Group)

    13. Md Imran H. Khan, Mark Wellard, Md Mahiuddin, Karim, Azharul (2017). “Cellular Level Water Distribution and Its Investigation Techniques.” In Karim, Azharul & Law, Chung-Lim (Eds.) Intermittent and Nonstationary Drying Technologies: Principles and Applications. CRC Press (Taylor & Francis Group)